UMTS/HSPA+ router UR5i v2 inter-connects large variety of equipment into Internet or Intranet – namely cameras, computers, controlling systems, complete LAN networks etc.
UMTS/HSPA+ router UR5i v2 enable transfer of your datas at extraordinary high rate – max. downlink 14,4 Mb/s and uplink 5,7 Mb/s. This is an effective speed for example in picture and motion transfer from cameras (traffic density, crossroad cameras, security cameras etc.). This extra high download and upload speed enables even transfer of video stream.
The main benefit of UR5i v2 is extra high communication speed and a short response rate thanks to advanced UMTS/HSPA+ technology. Router is designed to work reliably in the professional applications requesting large data transmission loads in a short time interval via mobile operator wireless network.
Networking:
• DHCP – automatic IP addressing in LAN network
• NAT – IP address and ports translation between inside/outside network
• VRRP – virtual backup router function
• DynDNS client – access to the router with a dynamic IP address
• Dial-in – the ability to communicate over dial CSD call
• PPPoE Bridge – PPP frames encapsulation inside ETH frames
VPN Tunneling:
• IPsec, OpenVPN, L2TP – secure encrypted tunnels
• GRE tunnel – simple tunnel without security meassures
Configuriation and diagnostics:
• HTTP server – configuration via web server
• Telnet – configuration and access to the file system
• SNMP – router diagnostics, communication with I/O and M-BUS
• GPRS state signalization by LED
• On-line info on GSM signal status (level, cell, neighbours)
• SMS info – power on, GPRS connection or disconnection
• SMS control – on/off GPRS connection, switch SIM, I/O etc.
• Transferred data counting, one more APN as backup
• Remote router group configuration change, switching among
configuration profiles
• SSH – encrypted configuration and access to the file system
Other Funktions and Features:
• Linux based, possibility to program your own application
• NTP client, NTP Server – time synchronization
• SMS communication – AT commands on RS232, Ethernet and I/O
• M-RAM memory inside – router statistic´s saving into memory
Extensions:
• 2 × optional port: Port 1 and Port 2
Port 1: Ethernet 10/100, RS232, RS485/RS422, M-BUS Master or
CNT (I/O) - 2 × binary input, 2 × counter / binary input, 2 × analog
input, 1 × binary output)
Port 2: RS232, RS485/RS422, M-BUS Master
• Optional ports delivered on request of customer
• Metallic or plastic cover
• R-SeeNet – monitoring and management SW for routers
Typical Applications:
Industry & IT
› Remote machine service & control
› LAN and PC connection› PLC wireless connection, meter connection
› SCADA connection
Transport
› Trucks/containers
› Trains, river boats, taxi cars
Energy
› Wind power stations, solar panels
› Gas distribution systems
› Water distribution systems
Mobile applications
› Traffic/security cameras
› Kiosks, ATM, ticketing machines
› Meteorology/seismology |
